ASTMD495耐高压低电流电弧放电试验机
高电阻小电流量试验装置检测仪（耐电孤试验装置检测仪）-（服务器把控好）
High voltage low current tester (arc resistance tester) - (computer control)
设备明称：耐电弧试验机
Product name: electric arc resistance tester
服务主要参数：NDH-A
Product model: NDH - A
达到标准规定：GB/T 1411-2002《固态垃圾绝缘性建筑材料耐高降低电流量电弧焊接电池充电的现场实验》（就是指IEC 61621-1997）及ASTM D495等原则的条件设计方案打造的，并符合要求IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
最主要常用区间及功能性：
本应力测试英文机是明确广泛应应用于三相电机、电元件和小型电元件等餐饮行业的低压电工用金属、环氧树酯胶和耐压电阻漆等耐压电阻食材的耐脉冲功效认定，主应用于固态物体耐压电阻食材如：金属、pe膜、环氧树酯、黑云母、瓷器、玻璃钢、耐压电阻油、耐压电阻漆、纸壳等导电介质的耐脉冲功效测试英文；
本进行实验报告操作性室检测机由计算公式机把控好自动运行，能否显视在当下进行实验报告操作性程序及进行实验报告操作性用时，进行实验报告操作性截止后并保存文档在当下进行实验报告操作性数据分析，并可打印出.标淮實驗报告格式。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该机为上下左右一起结构特征，下端为运营系统软件，顶部为试验台箱。
2 本物料采用*新自动化把控好的技术，采用选择软件（IEC或ASTM）可会自动完成可靠性试验，并在电脑主机上提示疲劳试验工作和报告单。
3 **功效优良，抗扰乱程度强，测验计算精性高。
二：Functional features：
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 弧光通断时光误差率：高于 ±10ms
2 调压器储存量：2kVA
3 电机额定功率校正输出功率：12.5kV
4 现场实验端电压表面粗糙度：±3%
5 工作电流线性度等级：±10% 功率测量方法精准度：1.5%
6 电级对试板压强：（0.5±0.05）N
7 电级资料：钨棒
8 电级距離：（6.35±0.1）mm（IEC）
（6.0±0.1）mm（ASTM）
9 的使用情况气温：（23±2）℃
10 便用坏境温湿度：（50±5）%
11 电压：220V±5% 50Hz
12 经过多次实验发现 工艺： 国家标准下载/美标/10 mA 累计/20 mA 持续/30 mA间断/40 mA反复
13 实验室检测程序代码下面：
| 程序流程段 | 电弧焊接瞬时电流 mA | 弧光通断时间间隔s | 各软件程序段坚持事件s | 检验总日期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 累计通 | 60 | 240 | |
| 5 | 20 | 接连通 | 60 | 300 | |
| 6 | 30 | 重复通 | 60 | 360 | |
| 7 | 40 | 间断通 | 60 | 420 | |
Three main technical parameters：
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序号顺序 | 名稱 | 数 | 注 |
| 01 | 耐焊弧测评仪 | 整台 | |
| 02 | 电极片软件系统 | 一项 | |
| 03 | 电级支架 | 一款 | |
| 04 | 电源模块通信电缆 | 一种 | |
| 05 | 跨接放** | 一朵 | |
| 06 | 电流量毫安表 | 几台 | |
| 07 | PC测控APP | 一款 | |
| 08 | 试件架 | 一根 | |
| 09 | 电极片时间要求块 | 2块 | |
| 10 | 的视角条件块 | 2块 | |
| 11 | 工业陶瓷片 | 2片 | |
| 12 | 喷墨彩喷机机 | 1台 | 企业 |
| 13 | 计算公式机 | 1台 | 的品牌 |
| 14 | 用详细电子说明书 | 1份 | |
| 15 | 合理证 | 1份 | |
Four configuration：
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 品牌机型：
NDH-A 耐弧光试验台仪-微机管控
NDH-B 耐焊弧实验设计仪-触控屏屏调控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！